Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Application of oil furnace
#1
 Oil-fired stoves are suspension-burning stoves that use heavy oil as fuel. It is generally composed of an oil burner, a noise port and a furnace cavity. The main components of an oil burner are the fuel nozzles and the register. The combustion process of oil is actually first atomized into small oil droplets, sprayed into the furnace cavity, and the oil droplets are heated and evaporated and diffused and burned. Martensitic stainless steel vacuum sintering heat treatmentThe intensified combustion process is achieved by intensifying the atomization, evaporation and mixing of oil and gas with air. Oil-fired furnaces produce very little soot, but heavy hydrocarbons or carbon are solids that are difficult to burn and often leave the furnace cavity unfinished, forming thick black smoke. The combustion temperature of oil is generally 1300-1500 ℃,Vacuum heat treatment furnace for copper alloys and the amount of nitrogen oxides generated is much higher than that of coal-fired furnaces. Most of the sulfur in crude oil is concentrated in heavy oil, and oil-fired furnaces that use heavy oil as fuel should also pay attention to the prevention and control of SO2 pollution.Battery cooler vacuum brazing
Reply





Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 Melroy van den Berg.